| SPECIFICATION |
| Swing Over Bed |
17” (432mm) |
| Swing Over Crosslide |
10” (254mm) |
| Distance Between Centers |
40” (1016mm) |
| Spindle Mount |
D1-6 |
| Spindle Bore |
1.77” (45mm) |
| Spindle Speeds (12) |
32-1920 RPM |
| Tailstock Taper |
5MT |
| Tailstock Spindle Travel |
6” (152mm) |
| Cross Travel |
18” (457mm) |
| Threading Inch (35) |
56- 2 T.P.I |
| Threading Metric (27) |
0.5-14mm pitch |
| Longitudinal Feeds (35) |
0.0017-0.0480”/rev. |
| Cross Feeds (35) |
0.0015-0.0408”/rev. |
| Spindle Motor |
7.5HP (5.6KW) |
| Power Requirements |
3PH /220V/50,60Hz
10KVA |
| Floor Space |
100” x 40” (2540 x 1016mm) |
| Machine Weight |
4520 lbs (2050kg) |
| ACCESSORIES |
| 3-Jaw Dependent Chuck (10”) |
| 3-Jaw Dependent Chuck (8”) |
| 4-Jaw Dependent Chuck (10”), without Mounting Plate |
| Drilling Chuck (1/64-1/2”) |
| Live Center (5MT) |
| Quick Change Tool Post (18pos.) |
| Boring, Turning and Facing Holder (1.18”) |
| 575/220V,3PH,15KVA Power Transformer (Optional) |
| CONDITION OF THE MACHINE - VERY GOOD |
