| SPECIFICATION |
| Cutting area (X x Y x Z) |
78.75 x 31.5 x 31.5
(2000 x 800 x 800mm) |
| X axis travel (Table right/left) |
78.75 (2000mm) |
| Y axis travel (Spindle up/down) |
31.5 (800mm) |
| Z axis travel (Column front/back) |
31.5 (800mm) |
| Feed rate |
1 - 196 in/min (1 - 5000mm/min) |
| Rapid traverse |
472 in/min (12m/min) |
| Index table dividing degrees |
1 degree |
| Spindle center to table |
4 - 35.5 (100 - 900mm) |
| Table center to spindle |
6.5 - 38 (165 - 965mm) |
| Combination table dimension |
24.75x 67 (630 x 1700mm) |
| Index table dimension |
24.75x 24.75 (630 x 630mm) |
| Combination table carrying capacity |
4400 lbs (2000kg) |
| Index table carrying capacity |
2200 lbs (1000kg) |
| Spindle speed |
20 - 3000 RPM
(infinitely variable) |
| Number of steps for spindle speed change |
2 steps automatically |
| Spindle motor (AC) |
30 min 25 HP (18.5kw)
Cont. 20 HP (15kw) |
| Spindle taper |
No. 50 |
| Tool shank type |
BT50/CAT50 |
| Tool magazine capacity |
30 tools |
| Maximum diameter of tool (when magazine is full) |
4.33 (110mm) |
| Maximum diameter of tool (when adjacent pots are empty) |
6 (150mm) |
| Maximum length of tool from gauge line |
13.75 (350mm) |
| Maximum weight of tool |
33 lbs (15kg) |
| Tool selection system |
Random memory |
| Tool change time (tool to tool) |
5 sec |
| Tool change time (chip to chip) |
13 sec |
| Floor space required |
200 x 160 (5080 x 4064mm) |
| Machine height |
126 (3200mm) |
| Total machine weight |
23080 lbs (10490kg) |
| ACCESSORIES |
| Collision protecting system (X, Y and B axes) |
| Splash guards |
| HL unit (Hydraulic & Lubrication) |
| Auto lubrication equipment |
| Coolant equipment |
| Chip conveyor |
| Work light |
| Leveling blocks |
| Complete set operating, programming and maintenance manuals |
| CONDITION OF THE MACHINE - EXCELLENT |
| |
| OPTIONS |
| 1. The Machine as is. |
|
2. Retrofitting of the Machine according to customers requirements for CNC
Control, Axes and Spindle Drives and Level of Retrofitting. |
3. Retrofitting of the Machine to Manual Controlled Motorized Boring Mill
(Variable Speed Axes and Spindle Drives, PLC, DRO). |
